fbpx

UNIFOAM®: CUSTOMIZED INSULATION

If your project requires particular specifications, such as dimensions, density or insulation factor, Polyform manufactures tailor-made insulation boards: UNIFOAM®. In addition to your preferred dimensions and densities, it’s also possible to laminate the expanded polystyrene board with different materials: you get an added-value product, ready to be installed at your project site.

Polyform is also the largest Canadian manufacturer of Graphite EPS products, which allows higher R-factor compared to other standard insulation boards.

UNIFOAM

HYDRONIC CUT

1. Lay under the concrete slab only.
The ground must be flat and levelled (ideally compacted).
2. If needed, apply a vapour-barrier membrane on the ground before covering your surface with UNIFOAM® boards.
3. Insert hydronic floor heating pipes in the required direction between notches.
Use 1/2 in (13mm), 5/8 in (16mm) or 3/4 in (19mm) pipes.
4. Once pipes are installed, you can pour concrete directly onto UNIFOAM® boards
Refer to your local Building Code.

Installation UNIFOAM

ANY CUT

We recommend you to contact a Polyform sales representative for specific technical advice on
how to use this versatile product in your project.

Superior Performance

Lightweight and easy to handle
Tests results superior to ULC standards
Increased comfort: Allows for a stable and uniform indoor temperature year round

Hydronic cut:

Efficient installation: Hot wire cut notches for uniform insertion of heating pipes
Quick installation: Notches allows for setting the pipes without fasteners

Economical

Permanent insulation value
Best quality for the money
Energy savings through elimination of thermal bridges
Less labour required during installation

Ecological

100% recyclable
Contains no CFCs or HCFCs
Resistant to water and moisture that may be the primary cause of mildew formation
Non-toxic, contains 98% air and 2% material
Can be handled without health hazards and is non-irritating to skin
Can contribute to earning points as part of a LEED® project

No document available.

Retailers

Matériaux J. Anctil (Rona)

3110, Route 222, St-Denis-de-Brompton, QC, J0B 2P0

Tel:
819-846-2747

http://www.rona.ca/fr/Rona-j-anctil-inc-saint-denis-de-brompton-saint-denis-de-brompton

Matériaux Magog (Rona)

205, rue Centre, Magog, QC, J1X 5B6

Tel:
819-843-4441

http://www.rona.ca/fr/Rona-materiaux-magog-orford-magog-magog

Domaine du Rénovateur (Home Hardware)

42, route 147, Coaticook, QC, J1A 2S2

Tel:
819-849-2761

http://www.homehardware.ca/store/25115

Surplus Malouin (Home Hardware)

6400 rue Foster, Waterloo, QC, J0E 2N0

Tel:
450-539-3722

http://www.homehardware.ca/store/24795

Givesco Gatineau-Ottawa

795 rue Vernon, Gatineau, QC J9J 3K4

Tel:
819-770-5582

http://www.givesco.com

Givesco Trois-Rivières

2450 rue De La Sidbec Sud, Trois-Rivières, QC G8Z 4H1

Tel:
819-373-9090

http://www.givesco.com

Matériaux Létourneau (BMR)

4855, route 143 Sud, Waterville, QC, J0B 3H0

Tel:
819-566-5633

http://www.matletourneau.com

Matériaux Létourneau (BMR)

550, rue du Parc-Industriel Arrondissement Bromptonville, Sherbrooke, QC, J1C 0J2

Tel:
819-846-4433

http://www.matletourneau.com

L’Entrepôt Rona Granby

200, rue St-Jude Nord, Granby, QC, J2J 2R8

Tel:
450-777-1444

http://www.rona.ca/fr/Lentrepot-rona-granby-granby

Givesco Rimouski

468, rue de l'Expansion, Rimouski, QC, G5M 1A9

Tel:
418-722-0146

http://www.givesco.com

Givesco Saguenay

841 rue du Royaume, Chicoutimi, QC, G7H 5B1

Tel:
418-545-1945

http://www.givesco.com

Givesco Québec

175 Avenue St-Sacrement, Québec, QC, G1N 3X4

Tel:
418-871-3377

http://www.givesco.com

Givesco Sherbrooke

430 rue Leger, Sherbrooke, QC, J1L 1Y5

Tel:
819-563-3052

http://www.givesco.com

Givesco Montréal

9495 rue Pascal Gagnon, St-Léonard, QC, H1P 1Z4

Tel:
514-327-7175

http://www.givesco.com

Matériaux Bomat

1212 Chemin Industriel, Lévis, QC, G7A 1B1 (secteur St-Nicolas, Sortie 305)

Tel:
418-831-4848

http://www.bomat.ca

Coop Ste-Hélène (BMR)

655, rue Principale, Sainte-Hélène-de-Bagot, QC, J0H 1M0

Tel:
450-791-2666

http://www.coopste-helene.qc.ca

Centre de rénovation Gilles Doyon (BMR)

282, rue Angus S, East Angus, QC, J0B 1R0

Tel:
819-832-4944

http://www.bmr.co/fr/centre-de-renovation-g-doyon-inc

BMR St-Jean-sur-le-Richelieu

950, rue Bernier, Saint-Jean-sur-le-Richelieu, QC, J2W 0H4

Tel:
450-359-1311

http://www.groupeyvesgagnon.com

  • UNIFOAM® LDP insulation board 48” x 96”

    UNIFOAM® LDP. Hot-wire cut EPS insulation board.

    Lot Dimensions48 × 96 × 32 in
  • UNIFOAM®30 insulation board – 2 sides shiplapped

    UNIFOAM®30 hot-wire cut EPS insulation board (type 3 ULC). Shiplapped on 2 sides.

    Clear
    Lot Dimensions24 × 96 × 15 in
    Facteur R

    R-4.26, R-5.33, R-6.39, R-7.99, R-8.52, R-10.65, R-12.78

  • UNIFOAM®30 insulation board – 24” x 96” Square cut

    UNIFOAM®30 hot-wire cut EPS insulation board (type 3 ULC). Square cut.

    Clear
    Lot Dimensions24 × 96 × 15 in
    Facteur R

    R-4.26, R-5.33, R-6.39, R-7.99, R-8.52, R-10.65, R-12.78

  • UNIFOAM®30 insulation board – 4 sides shiplapped

    UNIFOAM®30 hot-wire cut EPS insulation board (type 3 ULC). Shiplapped on 4 sides.

    Clear
    Lot Dimensions24 × 96 × 15 in
    Facteur R

    R-4.26, R-5.33, R-6.39, R-7.99, R-8.52, R-10.65, R-12.78

Applications

Hydronic Cut

Insulation under the concrete slab for residential, commercial, industrial and institutional constructions. 

Any Cut

Insulation for interior and exterior walls, interior and exterior foundation walls, ceilings and roofs, under and on concrete slabs.  It meets the needs of residential, commercial, industrial and institutional constructions.

Dimensions

This custom board can meet your needs: dimensions, density or R factor.
© 2019 Plastiques Cellulaires Polyform Inc. All rights reserved. Conception Esprits Libres Design